How to Change a Flat Tire In Easy Steps

Today we are going to talk about how to change a flat tire. If you do not know how to fix a flat tire, it is time to learn how to fix it as you may get stuck on any road. You are a driver known to change tires. What action would you take if you were driving and the tire was flat? So let's get more information on how to change a flat tire.

Changing tires is not difficult, you can do this easily if you have the necessary items. If you did not come up with the above items when you bought the car, buy a new one. Also check the spare tires whenever you check the air pressure of the tires. Keep checking the air pressure of the tire for a short period of time while you are traveling for a long time, carrying heavier items.

Safety items while working

  • Batteries
  • Gloves
  • Wheel wedges
  • Rain poncho

There are a lot of things that do not come with when you buy your vehicle but it is necessary to buy and keep them in the box.

Solution for how to replace flat tire

Finding a place to stay safe

Take the advice of You already have flat tires and if you continue your journey, you should already park the vehicle as a precautionary measure and start the process, regardless of the vehicle. At such times if you are equipped with the tools used to change tires and know the process of how to change tires, you can hopefully change tires. While driving you will immediately notice that the tires are flat, do not suddenly brake and do not turn the vehicle.

Decrease the speed and try to catch the safe area around you. Find an empty parking lot as far as possible so as not to cause any other disturbance. Keep moving forward until you find a safe place to play.

Flat driving is a risk and a nearby guide to stay safe. Find a flat surface to change the tires of the car which will not allow the car to go up and down and will be in the same level from all sides. Don't park on loose and bumpy roads. Introduce flashers in congested areas and traffic areas.

Turn on the hazard light immediately

To prevent an accident, turn on the "Flashers" so that the oncoming drivers know what might be helpful to you. Also turn on the brakes for parking as your flat tires will come in handy. The tires start to move very fast after they are flat.

Hazard lights should be turned on immediately without forgetting which will warn other motorists. And be safe.

Put a heavy object near the tire

When changing tires, place a heavy object in front of the front and rear tires of the car so that it is safe and stable. It is also easy to change the tires. Place heavy objects like bricks and large stones on the front and back of the wheel as you process them so that the tires do not move and are safe. Park the car properly. Both the jack and the tire are important to place at the bottom on the edge near the tire during processing and then check that it is in contact with the edge.

Prepare to put in the spare tires and jacks

Place the jack in the lower frame of any vehicle. But special care should be taken to place the plastic in the right place which is prone to break. To follow the instructions given by the owner. When lifting a vehicle using a jack, remove any part of your body from under the vehicle. Because there is no safety in this process.

Remove the hubcap and gently loosen the nuts

To be able to unscrew the lug nuts already by hand. Place the spare tire on the lug and place the spare on the hub with the lug balls until and push lightly Tighten well by hand once.Tighten as much as possible and then lower the vehicle to the ground, then tighten with a wrench Then use the jack again to bring the vehicle down so that the weight of the vehicle does not remain and give as much body Strength as possible to the lug wrench so that it tightens.

It would be better to remove the hubcap when changing the tires and remove it already if the hubcap is just above the nuts. Use the tools needed to remove the hubcap, such as a wrench. Seek guidance if needed. Open the lug nuts using the lug wrench, rotating clockwise until it opens. Loosen the lug nuts to a quarter. But never open completely.

Elevate the vehicle using the jack

Check if it lifts the car. Check that the jack is in the right place in the vehicle and check that it is above the ground and not horizontally.

Check that the air pressure in the tire is correct

Now remove the jack and replace the hubcap. Check if there is air in the spare tire. You should check the spare tire pressure to see if there will be safety while driving. About 60 PSI is required. Drive slowly if air is low and remove the wheel. Most cars have a plastic shield. If you don't put the jack where it should be, the plastic will break and the jack will fall back down. And if you don't know where and how to put Jack, consult your boss.

Re-fit the spare tire

Delete hubcap Rotate counterclockwise Be prepared to make any changes to the tire by holding the breaker bar in the trunk and make a fixed socket size for the lug nuts. Once again fit the lug nuts by hand then use the lug Wrench and turn the handle clockwise and lower the vehicle using the jack. Remove the jack after the spare tire lands safely. Replace the vehicle's jack, wrench, hubcap flat tire after the spare has been installed all the way. Repair and reinstall.

##txtlinkaffiliateads ##imagelinkaffiliateads

More in Auto